British WWII Ammo Boots: Hobnails, Pebble Grain and Breaking In
The first time I wore a pair of ammo boots across a tarmac car park I sounded like a small troop of horse. Every step clacks. You stop noticing after an hour or so, but everyone else at the event doesn't, and I've come to think that noise is half the impression. A British section in battledress with silent rubber soles just looks wrong to me, even before you get close enough to see the leather.
So this post is about the British WWII-Style Ammo Boots: what the originals were, how this reproduction is put together, and what I've learned (mostly the hard way) about wearing and looking after a pair.
Where the Ammo Boot Came From
The hobnailed ankle boot wasn't a Second World War invention. It was in use by the British and Commonwealth armies from the 1860s, which means the same basic shape went to South Africa, to the Western Front and then out again in 1939. Officially it was Boots, Ankle, General Service. Nobody called it that. It was the ammunition boot, or just ammo boots.
The pattern is easy to describe and hard to improve on: ankle height, pebbled leather uppers, a cap toe, and a leather sole with heel and toe plates and rows of hobnails (studs, if you prefer). And it went everywhere. NW Europe, Iceland, the Western Desert, Burma. Same boot, more or less, whatever the ground underneath it.
The "more or less" matters if you're fussy about dates. Pre-war boots were heavy things, with sources describing up to 25 iron hobnails in each sole. Wartime economy cut that back, and a reduced pattern of 13 studs per sole is usually tied to regulations from September 1942. I'd treat that date as a guide rather than gospel, since old pairs stayed in use for years. If you're doing 1940 France and someone points at your stud count, you'll at least know what they're on about.
It wasn't only the Army either. The RAF had its own hobnailed boots for ground staff and some aircrew from the 1920s until just after the war.
What You Get With These Ammo Boots
The maker's own note says this new run of British WWII-Style Ammo Boots is a big improvement in quality over earlier batches, and having seen older pairs on other people's feet I believe it. The boots are all-leather construction with pebble grain uppers and a cap toe, and they arrive with toe and heel irons and hobnails already fitted. No hunting for studs before your first event, which is a mercy.
One thing to get straight before ordering: they're made in US sizes. Not UK. I've watched people order their British size because it's a British boot and then wonder why their toes are crammed in. Read the reviews on sizing, because opinions differ (some went up a size, some stayed true to size, one suggests half a size down).
Bulling, Spooning and Dubbin
That pebble grain is the bit people argue about. It was pressed into the leather before the boot was made up, and it's lovely and authentic in the field. But on parade the Army wanted a mirror toe cap, and you can't get one on a surface that looks like orange peel. So men smoothed it out. The trick that comes up again and again is a spoon heated over a flame, rubbed over the leather to flatten the grain before hours of polish, cloth and water. Bulling, in other words. Accounts from National Service in the 1950s describe exactly the same routine, so it lasted a long time.
There's a story that bulling started in India to keep bored soldiers away from drink and trouble. Nice story. I've only ever seen it passed on as rumour, so I wouldn't repeat it at a display as fact.
Field boots were a different matter. Polish for camp, dubbin for the field, to keep the leather supple and the water out. I've also read that from 1942 soldiers were made to apply dubbin as protection against blister gas, though I haven't seen the order itself.
My own view is simple. Decide what you're portraying before you touch them. A front-line infantryman in Normandy shouldn't have a glass-fronted toe cap. A man on a barrack square in 1939 probably should. Once you've spooned the grain flat you can't really put it back.
Do You Need to Break Them In?
Yes. Properly. These are stiff out of the box, particularly around the toe cap, and if you take them straight to a weekend event you'll spend Sunday in trainers behind the tent.
What's worked for me, and for most people I know who wear them:
- Wear them round the house and garden for a couple of weeks first, short spells.
- Wool socks, thick ones. Original-style or modern hiking socks, both are fine.
- Feed the leather. Dubbin or a decent oil on the uppers, and some people oil the insides too.
- Add an insole if the fit is a touch loose. Lots of wearers do and it doesn't show.
Some people do the old soak-and-wear-dry method. I'm wary of it myself (I worry about the stitching) but people swear by it.
Wearing Them at Events
For a WWII British or Commonwealth infantry impression these go with web anklets and battledress, and that's that. Lace them straight across, ladder style, and tuck the ends away.
A few practical bits. Hobnails on smooth stone, wet steps or metal floors are lethal, so take a bit of care on the walk from the car park. If you're doing a tank crew impression, it's worth knowing that at least one customer pulled the hobnails out for exactly that reason. And they're noisy indoors.
On the plus side they're tough. Really tough. People have done long hikes in them, and the leather takes a beating that would finish off a modern fashion boot. Don't expect them to feel like trainers, though. They're supposed to feel like ammo boots.
What Our Customers Say About It
The reviews are worth a read, partly for the sizing advice. One group reported on a long, hard day out: "Eight out of the ten of us were wearing WPG Ammo Boots." The same reviewer added that "No hobnails were lost, and very few blisters were noted."
A tank crew reenactor who took the hobnails out wrote: "These things are insanely tough." Another put it simply: "Highly recommend for the WW2 British infantry impression."
Not every review is glowing, and I think that's useful. One long-time wearer felt the soles were thicker and the toe "very very hard" on a pair from about 20 years ago, and another flagged eyelets that were "not pressed completely" on their pair. On fit, one buyer found them "too tight" in their usual size and hoped to swap up a size. You can read the full set on the customer reviews page before you choose a size, and if you're ready, the British WWII-Style Ammo Boots are on the product page.
Disclaimer: Historical information provided for educational purposes only. For accurate product specifications and details, please check our product pages, reviews, or contact customer service.
Experience a piece of history for yourself! Check out our authentic reproduction of British Army WWII Style Ammo Boots here: Get Your British Army WWII Style Ammo Boots












